How To Generate Track 1 From Track 2 - Full Cvv Dump Guide

[Fraudbox]

Understanding Track Data / Generating Track Data ​

In todays tutorial I will be showing you how you can generate Track 1 data if you have Track 2
Data so if you already purchased your 101 / 201 cvv dump and it only has track 2 you will now
understand and know how to generate track 1 manually

UNDERSTANDING TRACKS #TRACK 1​

Track #1 contains the credit card number, the credit cardholder’s name, and the credit card’s
expiration date.

Track 1 is the only track of the card that contains the account holder’s name but you can
change the name from the track to match with the fake IDs you have or with the name
embossed on the plastic and that will still work 10 / 10 times.

His track is written with code know as odd party "Dec Sixbit" Track 1 format is usually as it follows :

%B3703730081287237^NICO/STARK D ^210910100000023001000000415000000?

START SENTINEL = is 1 character, usual ( % )

FORMAT CODE = a single character, financial cards format code is( B )

PRIMARY ACCOUNT NUMBER (PAN) = usual is the card number, but not always
(3703730080187237)

FIELD SEPARATOR = financial cards use a single symbol for it which is ( ^ ) NAME OF

CARDHOLDER = contain 2 until 26 characters (BRAND/STARK)

FIELD SEPARATOR = symbol for it is ( ^ )

EXPIRE DATE = in format YYMM (2009)

SERVICE CODE = three characters (101)

DISCRETIONARY DATA = which may contain PIN VERIFICATION KEY (it is not the ATM PIN), card

verification value, CVV (00000023001000000415000000)

END SENTINEL = is 1 character, usual ( ? ) #TRACK 2

The second track contains the credit card number and the expiration date, it is the most
important track of your dump this track will make all the difference whether your ATM your Dump Pin will spit
out the money or you will get the refusal instead.

Almost all dumps pins will withdrawl cash if track 2 is valid It is written with a 5 bit-scheme,4 data
bits, and 1 parity bit, a parity bit, or check bit is a bit added onto track 2 for error detection as it
requires the authorization step to be discarded entirely or re-transmitted from scratch which is
what makes the ATM to spit out your card in case of a problem with your Track 2.

Track 2 data format is as follows:

340373660206009=200910118023328700000?

START SENTINEL = is 1 character, usual ( ; )

PRIMARY ACCOUNT NUMBER (PAN) = usual the card number ( 370373660206009 )

SEPARATOR = usual symbol ( = ) EXPIRE DATE = in YYMM format (2009 )

SERVICE CODE = a three digits code ( 101 )

DISCRETIONARY DATA = which may contain PIN VERIFICATION KEY (it is not the ATM PIN), card

verification value, CVV (18023328700000 ) END SENTINEL = usual the symbol ( ? )

#TRACK 3

The third track contains information about custom #TRACK 3mer loyalty programs (if any), some banks use
it for programs such as airline rewards but It is virtually unused by the vast majority of banks. It
was developed by Thrift Saving Industry. Point Of Sales (POS) will not read this track.

The card service code is a 3 digits code present in both Track 1 and Track 2.

Each of the 3 digits of the code has a meaning and read it together the service code let you
know where and how the card can be used

IF THE FIRST DIGIT DUMP CVV IS:

1– the card is for international use
2– the card is for international use but has a chip
5– the card is for national use
6– the card is for national use but has a chip
7– the card is not good for interchange except for bilateral agreements 9 – test card

#IF THE SECOND DIGIT IS:

0 – the card is normal, without restriction

2 – issuer must be contacted via online means

4 – issuer must be contacted via online means except under bilateral agreements

#IF THE LAST DIGIT IS:

0– no restriction but the PIN is required
1– no restrictions
2– the card can be used for goods and services payment but not for cash
3– ATM use only, PIN is required
4– cash only
5– the card can be used for goods and services payment but not for cash but PIN is required
6– no restrictions, PIN should be used where is feasible
7– the card can be used for goods and services payment but not for cash but PIN should be
used where is feasible

Now you have a fairly detailed understanding although you may not think that you do but feel
free to go over this priceless information a few times to observe and let it sink in.

once you understand the basic principles of what these tracks are, how they work, and what
service codes are used for you can continue expanding your knowledge with
@Fraudbox we are on a mission to provide you with all the knowledge
and tools thereafter to put all the theory you learned and understand into practice by doing it.

GENERATE TRACK 1 USING TRACK 2

If you have just scrolled down to this section by skipping all the information above you will be
missing a critical piece of information, those who have read the entire article above before
coming to this section would know exactly what we mean by that.

So in order to generate Track 1 let’s take the example of this dump Track 2 (this is an

actual dump):

4867327031853618=15051011103191805191 – this is Track 2 (we want to make Track 1 out of
Track 2).

JHNSON/CHALOTTE – is the name of the cardholder (LASTNAME/FIRSTNAME)

JP MORGAN CHASE BANK – is the bank’s name

The United States – is the Country of Bank

DEBIT – this is the type of card whether its a credit or s debit (in this case its a debit

card) Classic – is the brand of card, eg. Traditional, Classic, Gold, Platinum, Business

So when you see an equal sign “=” in a Track it always means it is Track 2 and when you see
the letter “B” in front of the Track it is always Track 1.

Now to Make a Track 1 From Track 2 this is how we do it and you can
copy our technique to generate your track 1:
So as mentioned above we have Track 2,4367327031853618=15052011203191805991 but let’s
just take the Credit Card account number from this Track 2 so the card number
is 4367327031853618.

Add the letter “B” in the front of the number like this: 4367327031853618

Then add the cardholder name you want to show on the card using “^” at the start and the end
of the name just like this:

B4367327031853618^Jhnson/Charotte^ (Last-Name/First-Name)

Next, you will add the expiry date and service code (expiry date is “YYMM” in this
case “1505” and in this case, the 3 digit service code is “101” so you will be adding “1505101”),
so now see what we have is:

B4367327031853618^Jhnson/Chalotte^1505101

Now add 10 zero’s after service code like this:

B4867327031853618^Johnson/Charlotte^15051010000000000

Next, you will add the remaining numbers from Track2 (after the service code) like this:

B4367327031853618^Jhnson/Chalotte^150510100000000001203191805191

And finally, you will add six zero’s (6) zero’s after that like this:

B4367327031853618^Jhnson/Chalotte^15051010000000000120319180519100000

So the final track would look like this:
Track 1:B4867327031853618^Johnson/Charlotte^15051010000000000120319180519100000
0

Important Note: This Track 1 generation process is valid for “Visa” and“MasterCard” only, it
will not work for Discover, Amex, and so on
Also, a very important thing to take into consideration is that you do not need to generate track

Track 1 Track 2 PIN